Stainless Steel Flanges
A flange can be generally classified as a plate, forging or cast ring that is used to join sections of tube, pipe or items of plant such as a pump or valve. There are a number of different standards applicable to flanges commonly used in industry today.
The three which are most frequently requested are, BS 4504, ANSI B 16.5 and BS10 (Tables D and E). Flanges are usually welded in position or are fitted loose on a Lap Joint Swivel Stub. However, there are a great variety of options available in the form of each flange including threaded, blind, weld neck and slip-on.
The three which are most frequently requested are, BS 4504, ANSI B 16.5 and BS10 (Tables D and E). Flanges are usually welded in position or are fitted loose on a Lap Joint Swivel Stub. However, there are a great variety of options available in the form of each flange including threaded, blind, weld neck and slip-on.
Please refer to our technical department for advice.
-
BS 4504 1989, including PN 2.5 to 40 Bar
-
ANSI B 16.5 flanges, including 150lb to 1500lb
-
Sizes available from ½” to 24”
-
Lap joint stub ends. Fasteners such as bolts and studs
-
Seals available in Silicone, EPDM, Nitrile and PTFE encapsulated materials
| FLANGES - DATA SHEETS | |
| ANSI 150 316L (D7007-01-vo2) | Table D 316L (D7008-01-vo2) Table E 316L (D7009-01-vo2) |
| Table D 316L (D7008-01-vo2) | Table D 316L (D7008-01-vo2) PN16 316L (D7010-01-vo2) |
